ENGLISH
TO ATTACH A COMB
•
Hold the comb with its teeth upward.
•
To attach a comb, align the legs of the comb with the holes in the top of the clipper on
each side of the blade and slide the legs into the trimmer until they click.
•
To remove, firmly pull the comb straight up away from the clipper.
HAIR CLIPPER COMB SETTINGS
•
The clipper comes with two adjustable combs, a short length adjustable comb
(indicated by 1-21mm on the back of the comb) and a longer length adjustable comb
(indicated by 24-44mm on the back of the comb).
•
Please see table below for different cutting lengths available on each comb.
Shorter Length Adjustable Comb
•
On the slide select switch there is a silver indicator which, when the short length
adjustable comb is on the product, shows the corresponding length setting on the left
of the slide select switch. On the other side of the slide select switch there is another
silver indicator which shows the corresponding length setting when the longer length
adjustable comb is on the product, on the right side of the slide select switch.
•
To adjust the length settings, you must press the upper half of the slide select switch to
release the locking mechanism, then apply force upwards on the slide select switch to
increase the length setting. To decrease the length settings press the upper part of the
slide select switch down and slide downwards.
•
Use the clipper without any fixed combs for trimming hair close to the skin.
•
This will trim hair to 1mm, holding the clipper so the blades are perpendicular to the
skin will trim hair to 0.5mm.
INSTRUCTIONS FOR CUTTING HAIR
•
To turn the product On or Off slide the switch. To locate the On/Off switch please refer
to the key features section.
•
For even cutting, allow the comb attachment/blade to cut its way through the hair. Do
not force it through quickly. If you are cutting for the first time, start with the maximum
comb attachment.
6
1mm
3mm
6mm
9mm
12mm
15mm
18mm
21mm
Longer Length Adjustable Comb
24mm
26mm
29mm
32mm
35mm
38mm
41mm
44mm