PROBLEM
POSSIBLE CAUSE
N
ozzle hole
food particles.
ozzle does not
N
The nozzle is blocked by a dish or
rotate smoothly.
pot and cannot rotate.
Water won't
The drain is clogged.
pump out of the
dishwasher.
Has a bent upper
The dishes are not loaded
rack after loading
properly.
dishes.
AutoRelease™ Dry mode is in
operation.(For applicable models)
Cannot close the
door.
SOLUTION
Clean the nozzle hole . See page 20.
s are
clogged with
After placing the dishes into the racks,
rotate the nozzles by hand to check
whether any of the dishes interfere with
them.
Contact a qualif ied service technician to
remove any obstruction from the drain hose
and check the drain pump operation.
Load your dishes as recommended.
(See page 14.)
Once the door opens in the AutoRelease™
Dry mode, the door cannot be closed
manually for the next 2 minutes. You may
close the door after 2 minutes.
English - 25
s