Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL PANEL
Power
1
Cycle Selector
2
Hi-Temp Steam
3
Wash
Sanitize
4
Heated Dry
/
5
(Control Lock)
Delay Start
6
Indicators
7
1
When you press the Power button, the entire display turns on and off, and
then the light of the most recently f inished cycle lights up.
When the selected cycle is complete, the dishwasher powers off
automatically.
Select the appropriate wash cycle depending on the soil level of your
dishes. After you select a cycle, the Cycle On light for that cycle lights.
If a problem occurs during an operation,
cause of t h e p roblem . The blinking i s a ccompanie d by a warning tone. For
more information, refe r to "Information Codes" on page 26.
Raises the main wash temperature to improve cleaning for loads containing
tough, baked-on food.
Hi-Temp Steam Wash
The temperature rises to 15 °F (
8
temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks when the water
temperature reaches the sanitary temperature (over 156 °F (69 °C)), and
then remains illuminated until the Sanitize option ends. When you press the
Power button, the "Sanitize" lamp turns off.
The Normal Cycle with the Sanitize option selected is NSF certified .
The Sanitize feature operates in accordance with NSF/ANSI Standard
184 for Residential Dishwashers. Certified residential dishwashers are
not intended for licensed food establishments.
When the "Heated Dry" function is selected,the heater will work during the
drying process.
Control Lock allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the
panel.
T o lock and unlock
the buttons on the control panel, hold the Heated Dry
button down for three (3) seconds when power is On.
Delay a cycle for 3 , , or 9 hours , The hour displayed indicates the time at which
6
the dishwasher will start.
Rinse Refill : Lights up if the dishwasher runs out of rinse aid.
Control Lock : Lights up if Control Lock is activated, and blinks if any button
except for the POWER button is pressed.
Clean : Indicates that the operation is over and that your dishes are clean.
English - 7
2
3
4
specific LEDS blink, indicating the
is not available for the
Express 60
°C) in the f inal rinse cycle for high
70
5
6
7
8
cycle.
Publicidad
