Uline H-9854 Instrucciones De Montaje página 2

1. Open both H-9854S and H-9854A boxes and
arrange parts on a flat surface as shown in Figure 1.
Figure 1
J
K I
G
J
2. Assemble left, center and right brackets as shown in
Figures 2-4. Tighten H screws first and then G screws.
3. Mount the left Bracket to the wall using two J screws
making sure that the large holes face to the right
and that the bracket is level.
4. Insert all E shelf tubes into the holes in the left
bracket.
5. Feed the other end of the E shelf tubes through the
holes in the center bracket.
6. Position the center bracket so that it is as far right
as possible while still supporting the E shelf tubes.
Mount the center bracket to the wall using two J
screws making sure the bracket is level.
7. Insert the tapered ends of M shelf tubes through the
holes in the center bracket and into the ends of the
E shelf tubes.
Figure 2
B
D
G
Left Bracket
PAGE 2 OF 6
L
E
H
Figure 3
H
A
ASSEMBLY
NOTE: The large 3/4" diameter holes face to the right
on the left end shelf support and to the left on the
right end shelf support.
M
J
H
I
G
J
8. Insert the ends of the M shelf tubes into the holes on
the right bracket.
9. Mount the right bracket to the wall using two J crews
making sure that the bracket is level.
10. Feed F hanger bar through left and center brackets.
11. Feed N hanger bar through the right and center
brackets making sure the tapered end fits into the
end of the F hanger bar.
12. Center the hanger bar between brackets and
tighten into place with the three I screws.
13. Press one K black end cap into each end of the
hanger bar.
L
D
A
G
Center Bracket
1-800-295-5510
uline.com
I
N
K
Figure 4
H
Right Bracket
J
H
G
J
C
H
D
A
G
1121 IH-9854