Publicidad
Idiomas disponibles
Idiomas disponibles
Using the pot and lid
1.The potty and lid are housed under the plastic seat. To add the potty, slide it under the seat from the back of the chair. Make
sure the potty is securely fastened to the two rails below the seat.
2.To remove the potty, slide it under the seat. Add the lid and carry the potty securely using the chrome handle.
Beware of the risk of pinching when using
CARE AND MAINTENANCE
Failure to care for and monitor your product may result in the risk of serious injury.
•
Wipe the product dry after each use.
•
Periodically clean the frame, castors, joints and fixings with a damp cloth and a mild detergent or disinfectant. For
example, a mild chloride-based disinfectant can be used.
•
Dry with a soft, clean, dry cloth.
•
Check the product for cracks and damage.
•
The chair must be completely overhauled every year, with compulsory lubrication.
•
We recommend servicing the product at least once a year. If the product is subject to intensive use and/or use in a
multi-user environment, we recommend more frequent servicing.
•
In case of malfunction, do not repair the product yourself. Consult an authorised dealer.
•
Checklist :
To keep the product in good condition, check before each use, and check regularly as follows:
Check the article
Check condition of seat (no cracks)
Check brake operation
Check folding function of armrests
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
the product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
RECYCLIN
G
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to
carry out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions may lead to deterioration of the product and thus to the risk of serious
injury.
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near a
radiator) or near a cold source.
Keep away from all flames and sources of sparks.
Observe the conditions for storing and stowing your product.
•
In a dry and temperate place
•
Protect your product by packaging it from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other
products when reassembling.
•
All components must be stored without any load (do not place any objects that are too heavy on theproduct elements,
do not jam anything...).
TECHNICAL SPECIFICATIONS
Version Juin 2023
Anytime
Weekly
X
X
X
8
Publicidad
