Lenco Classic Phono TCD-2571 Manual De Usuario página 10

⚫
Backlight: select this option to change timeout/on level/display illumination.
⚫
Language: select this option to change the system language.
⚫
Factory Reset: select this option to reset the device to factory settings.
⚫
Software Upgrade: select this option if a new software version is released.
⚫
SW version: select this option to see the current software version.
TIME SETTING
1. Press MENU button (21) (17 on remote) and select SYSTEM to Time option.
2. Set time/date. Press SKIP+/- (16/15) (12/13 on remote) repeatedly to select 12/24 digits for
hour. Press ENTER/EQ button (25) (16 on remote) again to confirm.
3. The hour digits will flash on the display. Press SKIP+/- (16/15) (12/13 on remote) repeatedly to
set the correct hour. Press ENTER/EQ button (25) (16 on remote) again to confirm.
4. The minute digits will flash on the display. Press SKIP+/- (16/15) (12/13 on remote) repeatedly
to set the correct minute. Press ENTER/EQ button (25) (16 on remote) again to confirm.
5. The day digits will flash on the display. Press SKIP+/- (16/15) (12/13 on remote) repeatedly to
set the correct year. Press ENTER/EQ button (25) (16 on remote) again to confirm.
6. The month digits will flash on the display. Press SKIP+/- (16/15) (12/13 on remote) repeatedly
to set the correct month. Press ENTER/EQ button (25) (16 on remote) again to confirm.
7. The year digits will flash on the display. Press SKIP+/- (16/15) (12/13 on remote) repeatedly to
set the correct day. Press ENTER/EQ button (25) (16 on remote) again to confirm.
SETTING THE ALARM
1. Press MENU button (21) (17 on remote) and select SYSTEM to Alarm option or Simply press
TIMER (20 on remote) repeatedly select Alarm 1 or 2.
2. Then press ENTER/EQ button (25) (16 on remote) to begin Alarms setting. You can press SKIP
(12 or 13 on remote) and ENTER/EQ button to set ON TIME, Duration, Alarm Source, Alarm
Frequency, and Alarm Volume Level, etc.
3. Once all the settings are done, you will see "Alarm Saved" and Alarm icon 1 or 2 on display
4. Once Alarm OFF is set, the Alarm Icon will disappear.
DAB MODE
Press function button (10) (5 on remote) repeatedly to select DAB mode.
Press SKIP+/- (16/15) (12/13 on remote) to search the program
DAB MENU
Press MENU (21) (17 on remote) to access to the options.
⚫
Full Scan: select this option to perform a full scan of the available DAB programs. You can
press SCAN (23) to perform the same action.
⚫
Manual Tune: select this option to select manually the DAB frequency.
⚫
DRC: select this option to choose between DRC low, DRC high and DRC off.
⚫
Prune: clear unavailable stations from the station List
10