Lenco Classic Phono TCD-2571 Manual De Usuario página 13

CD PROGRAMMING
You can program up to 99 tracks to play in any desired order.
1. Insert a disc and press STOP (14) (6 on remote) when it starts playing.
2. Press (8) on remote. "P01" will be shown on the display.
3. Press SKIP -/+ (16/15) (12/13 on remote) to select your favorite tunes.
4. Press (8) on remote to store the track in the program memory. "P02" will be shown on the
display.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press PLAY/PAUSE (13) (9 on remote) to start program play.
7. Press STOP (14) (6 on remote) once to stop the program play. Press STOP (14) (6 on remote)
twice to clear program.
How to Open/Close the Turntable Cover
To Open:
• Lift the Turntable cover all the way up until it stops.
• Lower the cover slowly until the latch engages. If the latch does not engage, pull
the lower bar by hand.
• The cover will now stay open.
To Close
• Lift the cover all the way up until it stops.
• The latch should disengage. Slowly lower the cover. If the latch does not
disengage, push out the lower bar by hand.
13