Publicidad
Idiomas disponibles
Idiomas disponibles
EN
PROTECTIVE DOOR SILL FOILS
- TRANSPARENT
Accessory products are intended for professional installation. SKODA AUTO recommends to
have the installation performed at our contractual partner's servicing place.
Use
The set is designed for the rear sills of SKODA FABIA (PJ) vehicles.
Caution. The figures in the manual serve as general information for the installation.
They might be different from the installation locations of a given vehicle in some details,
based on its equipment!
The manual describes the application of a protective transparent door sill foil
(hereinafter referred to as foil) on the left side. Follow the same procedure when
applying the foil on the right side.
The kit contains the following parts – see Fig. 1
Part name
Protective door sill foils, rear
Spatula
Cleaning tissue
Installation instructions
Important installation instructions
To ensure the quality application of the sill foils to the car, it is important that the room working
temperature, the vehicle temperature, and the assembled parts temperature are in the range of
18 - 30°C. Make sure no parts are not exposed to any direct sunlight.
Caution! Ensure the workplace ventilation during installation - the cleaning agents
contain hazardous vapours.
Installation procedure
The foils have a symmetrical and identical shape for both the left and right side.
Fig. 2
› Wash the vehicle sills with a weak solution of a suitable detergent and rinse with clean water.
› Then use a cleaning tissue (C) or other suitable cleaner (it is recommended to use Terostat
8550) to degrease. Upon degreasing, allow to ventilate for about 10 minutes.
Qty
Position
2
A
1
B
1
C
1
10
Publicidad
