Celexon Economy eAdjust-71121 Manual De Instrucciones página 15

STEP 1: MOUNTING FEET
Connect each of the feet (1) to a
column (2) & (3) and use the screws
(A) and tighten everything with the
Allen key (C).
STEP 2: MOUNTING THE SUPPORT STRUT
Loosen all four screws in the support strut (4) using the Allen key (C). Make
sure that the screws are well loosened, but not completely unscrewed. Now
pull the support strut out as far as required for the width of the table frame.
Loosen
Extend
4