Celexon Economy eAdjust-71121 Manual De Instrucciones página 17

STEP 4: MOUNTING THE TABLE HOLDER
Fit the table supports (6) to the columns (2) & (3) (as shown in the drawing).
To do this, use the screws (A) and tighten them with the Allen key (C).
STEP 5: ASSEMBLING THE TABLE TOP
1. Place the power supply unit holder
(11) onto the support strut (4) (see
drawing below).
2. Then mount the table top to the
table frame using the screws (F)
(according to the drawing).
Attention: The distance bet-
ween the edge of the table
and the table support must
be at least 200 mm.
6