JVC GR-D875U Manual De Instrucciones página 17

Checking the Remaining Battery
Power
Attach the battery pack.
BATTERY CONDITION
LEVEL
100%
DATA
50%
0%
• When the Power Switch is set to "OFF", it is
displayed for approx. 5 seconds if the button
is pressed and released quickly, and for
approx. 15 seconds if the button is pressed
and hold for several seconds.
• When the Power Switch is set to "PLAY" or
"REC", press DATA again to return to the
normal screen.
• Data battery status cannot be displayed
during playback or while recording is in
progress.
• If "COMMUNICATION ERROR" appears
instead of the battery status even though
you tried to press DATA several times, there
may be a problem with your battery. In such
a case, consult your nearest JVC dealer.
• Battery data display may differ due to the
environmental change if the LCD Backlight
is set to "AUTO". ( 32)
Using AC Power
3
Perform step in "Charging The Battery Pack"
( 16).
Attention:
Before detaching the power source, make sure
that the camcorder's power is turned off. Failure
to do so can result in a camcorder malfunction.
MAX TIME
120min
Getting Started
Language Settings
The language on the display can be changed
( 29, 33).
1
Set the Power Switch to "REC" or "PLAY".
( 13)
• If set to "REC", the recording mode should
be set to " M " ( 20).
2
Press MENU.
3
Select "SETTING" (
4
Select "LANGUAGE", press SET.
1 Select
2 SET
5
Select the desired language, press SET.
• Press £ whenever you want to return to the
previous menu screen.
6
Press MENU.
Date/Time Settings
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
( 29, 32).
1
3
Perform steps –
1
Select "CLOCK ADJ.", press SET.
1 Select
2 SET
2
Select the desired date display format,
press SET.
• Repeat this step to input time display
format (Select from "24h" or "12h"), month,
date, year, hour and minutes.
• Press £ whenever you want to return to the
previous menu setting.
3
Press MENU.
EN
).
in "Language Settings".
1