Descargar Imprimir esta página

RIDGID RP 342-XL Manual página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

RP 342-XL Press Tool
RP 342-XL Press Tool
Figure 5 – Tool Status Lights
Specifications
Attachments ............... RIDGID Standard Series
Stroke Length ............ Standard Configuration
1.57" (40 mm)
Duty Cycle ................. 3 Press
Ram Force ................ 32 kN (7,200 lbs.)
Motor
Voltage ................... 18V DC
Amperage .............. 27.2 Amp
Power ..................... 490 Watts
Power Supply ............. RIDGID RB-18XX Series18 V Li-Ion Batter y Pack
Operating Temperature
Range .......................... 15° F to 122° F (-10° C to 50° C)
Weight (no battery/
attachment) .................. 10.8 lbs. (4.9 Kg)
Height ........................ 10.5" (267 mm)
Width ......................... 3.35" (85 mm)
Length........................ 20.9" (531 mm)
Standard Equipment
Refer to the RIDGID catalog for details on equipment
supplied with specific tool catalog numbers.
NOTICE
Selection of appropriate materials and joining
methods is the responsibility of the system designer and/
6
Solid Light
Blinking Light
Icon
Green
Green
Red
Yellow
Yellow
/min.
Meaning
Tool ON, ready to use.
Low voltage. Tool will not operate. Battery - Recharge, AC Adapter
- Change power source, remove extension cords.
Tool out of Specification temperature range. Bring tool and battery to
correct operating temperature range .
Indicates service interval approaching. Light turns on after 18,000
cycles to show service interval is approaching. Tool is usable, but
tool will lock after service interval (20,000 cycles).
Tool locked. Service interval complete (20,000 cycles) and
requires service.
Tool has malfunctioned. Remove and reinsert battery. If still ON,
have tool serviced.
RIDGID Extended Series/RIDGID Approved
Extended Configuration
3.15" (80 mm)
3 Press
/min
or installer. Before any installation is attempted, careful
evaluation of the specific service environment, including
chemical environment and service temperature, should be
completed. Consult Press Fitting System manufacturer for
selection information.
999-999-207.10_REV. B

Publicidad

loading