Descargar Imprimir esta página

cecotec CONGA QUICK&CLEAN VITAL Manual De Instrucciones página 46

Robot aspirador

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
ENGLISH
Cleaning scheduling
-
For an easier cleaning, the robot includes a schedule function to set daily schedules
through the remote control. According to the setting, the robot will automatically start
cleaning in the selected days at the desired time.
-
The time options on the remote control are: 12:00 a. m.–11:59 p.m. and 12:00 p.m.–11:59 p.m.
-
Before setting the hour and the options on the robot vacuum cleaner, make sure it is on.
-
Press the schedule button on the remote control. The digits will start flashing. Fig. 28
-
Use the direction buttons upwards or downwards to select the day. Once selected, use
right and left buttons to select minutes and hours. To modify the minutes or hours, use
the left and right direction buttons to select the minutes and hours. Use the upwards and
downwards arrow direction buttons to change the digits while they flash. Press the Start/
Pause button again to save the settings. Follow the same steps to schedule the days. Fig.
29
-
Finally, press the schedule button to exit the scheduling mode. The robot will beep once
indicating the scheduled cleaning settings have been confirmed.
-
The user may schedule as many days a week as desired. The display screen will show
when the robot vacuum cleaner is programmed.
Cancelling scheduled cleaning
Press the schedule button on the remote control, select the day you wish to delete and change
the set time to 00:00 am., this is the time you need to set to cancel the cleaning programme.
Note
Make sure the remote control is close to the robot when setting the clock or scheduling
cleaning cycles.
5. CLEANING AND MAINTENANCE
High-efficiency filter:
Fig. 30
The high-efficiency filter is designed with fibres that help trap dust particles, dust mites,
pollen... It is very important to periodically clean the filter, to avoid these particles from
building up in the filter, causing efficiency loss. It is convenient to carry out this maintenance
once a week.
It is recommended to replace the high-efficiency filter with a new one without exceeding
160 cleaning hours.
Recommendations
Dirt can be removed with a small brush or by shaking it carefully against a hard surface for
dust to fall off. The high-efficiency filter cannot be washed.
46

Publicidad

loading

Este manual también es adecuado para:

05791