Descargar Imprimir esta página

cecotec CONGA QUICK&CLEAN VITAL Manual De Instrucciones página 48

Robot aspirador

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
ENGLISH
Battery charge and replacement
1. To lengthen the battery shelf life, keep the robot charging on the charging base when not
in use.
2. Remove the battery and store it in a safe, dry place if the device will not be used for a long
period of time.
To replace the battery, follow the instructions below:
1. Unscrew the 2 screws on the battery compartment, remove the battery cover and the
battery. Fig. 33
2. Insert the new battery with the battery label facing up. Fig. 34
3. Place the battery and the battery cover in its place and fix properly the screws back again.
6. TROUBLESHOOTING
Robot signal
1 beep
2 beeps
Red light
steady on
4 beeps
48
Cause
Omnidirectional
wheel error
Side brush error
Multifunctional
brush error.
Solution
Remove the wheel, clean it and once it
is placed again, press the Start/Pause
button to restart the robot vacuum
cleaner.
Remove the side brushes, clean them
and once they are placed again, press
the Start/Pause button to restart the
robot vacuum cleaner.
Remove and clean the multifunctional
brush. Once it is placed again, press
the Start/Pause button to restart the
robot vacuum cleaner.

Publicidad

loading

Este manual también es adecuado para:

05791