cecotec CONGA FLASH CONNECTED VITAL Manual De Instrucciones página 41

Robot aspirador

Idiomas disponibles

Press the power switch located on the lower part of the robot. Make sure the power

switch is in the on position (I). Fig. 17

Place the robot on the charging base and make sure the charging terminals on the robot

match those of the charging base. Once the robot is properly placed, it will beep once and

the power button will light up. If the light is oscillating orange, it means the battery is

not completely charged. To ensure the maximum cleaning time, wait until the light turns

into steady blue, as this will indicate the battery is fully charged and the robot is ready to

clean. Fig. 18

4. OPERATION

Starting the cleaning. Fig. 19

Hold down the Start/Pause button on the robot to turn it on.

Press the Start/Pause button on the robot vacuum cleaner or on the app to start cleaning.

Note:

If the robot runs out of battery while cleaning, it will automatically return to the charging

base. Once the battery is fully charged, the robot can start a new cleaning cycle.

If there is no good access to the charging base, the robot will not be able to return to it. If

this happens, place it manually on the charging base.

Pausing the cleaning.

Fig. 19

Press the Start/Pause button on the robot vacuum cleaner or on the app to pause the

cleaning process.

Press the Start/Pause button on the robot vacuum cleaner or on the app to resume the

cleaning process.

Turning off.

Fig. 19

Hold down the Start/Pause button on the robot to turn it off.

Warning

The robot vacuum cleaner has a power switch (with positions I and 0) located on the lower

part of the main body. If the robot will not be used for long periods of time, it is recommended

to turn it off using this switch. As a safety measure, if the robot is switched off (0 position),

it will restore the factory default settings. To operate the robot, the switch must be in the on

position (I)

Cleaning modes

This robot includes different modes and functions that can be activated via the app.

Auto mode.

Fig. 19

ENGLISH

05793