ENGLISH
Maintenance indicator
The full tank icon or the clogged filter icon will be displayed if maintenance on the vacuum
cleaner has not been properly and frequently carried out. Fig. 20
7. MOBILE APP
1.
Download the CECOTEC app.
2.
You must register with your email address; insert the activation code you will receive in
your email address and create a password. If you already have a user account, you can
log in directly.
3.
Press '+' on the main display to add a new device and select the Vacuuming section, where
you will find the Conga RockStar.
4.
Activate the Bluetooth and search your device in the linking list.
8. TROUBLESHOOTING
Problem
Possible cause
The motor does not operate.
The battery does not work
any longer.
The metallic tubes, floor
brushes, batteries or the
device itself are not properly
assembled.
The suction power decreased,
The dust tank is full. Fig. 20
and the vacuum cleaner
The filter has too much dust.
makes a lot of noise.
Fig. 22
The electric rotary brush inlet
is obstructed, or the brush is
blocked. Fig. 21
Insufficient operating time
Insufficient charge time.
after charging the vacuum
The battery is old.
cleaner.
(The battery life may vary
according to the room
temperature).
52
Solution
Charge the vacuum cleaner.
Make sure all parts of the
vacuum cleaner are correctly
assembled.
Clean the dirt.
Clean or replace the filter.
Clean the dust inside the
electric rotary brush.
Fully charge the battery
following the instructions in
this manual.
Batteries are easily
recycled. Go to the closest
maintenance point and buy
new batteries.
9. ERROR CODES
Code
Problem
E1
The vacuum cleaner shuts down and
does not charge.
E2
The vacuum cleaner does not charge. The charger's voltage is below 36.3 V
E2
The vacuum cleaner does not charge. The charger's voltage is below 32.1 V
The vacuum cleaner shuts down.
E3
The device turns off and displays E3
E5
The device turns off and displays E5
E6
The device turns off and displays E6
E9
The device turns off and displays E9
E7
The device stops working or does not
turn on and shows E7
E8
The device turns off and displays E8
High-
The device stops working or does not
efficiency
turn on. Fig. 22
filter
indicator
blinks
The filter
It works normally. Fig. 20
icon flashes
The brush
The long brush and motor stop
icon flashes
working. Fig. 21
10. TECHNICAL SPECIFICATIONS
Product reference: 05776
Product: Conga Rockstar 3000 Advance ErgoWet Connected IA
Voltage and frequency: 100-240 V ~ 50/60 Hz
29.6 V DC 3000 mAh 88.8 Wh battery
Motor rated power: 630 W
Brush rated power: 50 W
CONGA ROCKSTAR 3000 ADVANCE ERGOWET CONNECTED IA
ENGLISH
Cause
Short circuit
Low battery
The motor short-circuits when the
battery is low
Main motor overload (second level)
Main motor overload
Temperature too high or low
Battery fault (first level)
NTC error (thermistor short circuit)
High-efficiency filter not installed
The dust tank or the inlet filter is
blocked
Blocked long brush
Long brush full of hair
53