cecotec CONGA ROCKSTAR 2500 X-TREME ERGOFLEX Manual De Instrucciones página 25

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
Vacuum cleaner brush head release button
1.
Vacuuming tube release button
2.
Dust tank bottom cover unlock button
3.
Dust tank opening and filter access button
4.
Power button
5.
Power adapter
6.
Charging base
7.
2-in-1 narrow accessory for corners and furniture
8.
2-in-1 wide accessory for corners and furniture
9.
Jaliscazo brush
10.
Vacuum cleaner brush head
11.
Vacuum flexible tube
12.
Fig. 1.1
Display
1.
Speed buttonr
2.
On/off push button
3.
Battery
4.
Battery release button
5.
2. BEFORE USE
Take the product out of the box.
-
Check that all components are included. If any of them are missing or not in good condition,
-
please contact the official Cecotec Technical Support Service as soon as possible.
Fully charge the device before the first use.
-
During the first 3 uses, it is recommended to charge the device for 12 hours between uses.
-
Once the battery has been charged and used, it will start charging normally.
The normal charge time is 3 hours approx. When the battery is fully charged, unplug it.
-
Remove the first use tab installed on the filters.
-
Box contents
Conga RockStar 2500 X-Treme ErgoFlex vacuum cleaner
-
2-in-1 wide accessory for corners and furniture
-
2-in-1 narrow accessory for corners and furniture
-
Jaliscazo brush
-
48
Vacuuming flexible tube
-
1 spare high-efficiency filter
-
Charging base
-
Instruction manual
-
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
To install the brush head into the vacuuming tube, align both of them making sure the tab
-
on the brush head matches the guides on the tube, and introduce one into the other until
they are firmly fixed.
To disassemble them, press the brush head release button and pull from the vacuuming
-
tube while you hold the brush head.
Note
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
Vacuuming tube, brush head and main body assembly
Fig. 2.
To complete the installation of the device, once the brush head is assembled on the vacuuming
tube, hold the vacuuming tube with the brush head assembled upright and introduce the tube
in the main body.
Battery assembly
Fig. 3
Introduce the battery in the slot located in the handheld vacuum cleaner following the
-
guides. Once it is introduced, it will click into place. Check that it is secured in position.
To disassemble the battery, press the removal button (Fig. 1.1) and remove it.
-
Note
Remove the battery and store it in a safe, dry place if the device is not going to be used in a
long period of time.
4. OPERATION
You can use this vacuum cleaner in two different manners:
Handheld vacuum cleaner, attaching the accessories directly to the main body.
-
Upright vacuum cleaner, using the vacuuming tube with the accessories assembled.
-
ENGLISH
CONGA ROCKSTAR 2500 X-TREME ERGOFLEX 49