Publicidad
MAINTENANCE & CLEANING
Always switch the appliance off and unplug it before conducting any maintenance or cleaning
operation.
Use a damp cloth to clean the surface of the product. Clean the air inlet (8) and outlet (3) using a
soft brush or cloth.
Important: Do not use any abrasive materials, as these may damage the surface of the product.
Filter replacement
1 Filter model: XD6520F0
(including 2 sets)
3 Replace a new filter
Forced reset:
If you have replaced a filter before its end of life, force the reset of the filter replacement cycle:
Hold the oscillation button for 5 seconds.
IMPORTANT: it is recommended to change the filters as soon as the replace filter alert
indicator is triggered to avoid a product malfunction.
Filters
Action
Pre-filter
Clean with vaccum cleaner
Particle filter (ref: XD6520F0)
Replace when
« TIPS FOR CHANGING FILTERS »
• Avoid handling used filters if you suffer from allergies or asthma.
• Wear gloves when changing the filters, or wash your hands well afterwards.
• Put used filters directly into a closed, air-tight bag before throwing them away to
avoid spreading pollutants.
16
2 The indicator is lighted when the particle filter
needs to be replaced.
4 Long press the oscillation button for 5 seconds to
turn off the indicator light for filter replacement.
(beep sound).
Cycles
Every 2 weeks
Every 6 months (on average,
is lighted
according to the use
FILTER
environment).
PARTICLE SENSOR
Particle sensor inlets must be cleaned regularly (every 2 months) and properly.
Be sure to switch off and unplug the unit before cleaning the sensor inlets, and follow the
recommendations below:
Use a soft brush or vacuum cleaner to clean the sensor inlets near the remote control holder (4).
IMPORTANT: DO NOT use cleaning products on the particle sensor. It could alter its performance.
« HOW TO ACHIEVE CLEANER INDOOR AIR »
In addition to using your appliance, here are some tips on how to improve the
quality of your indoor air:
• Ventilate the rooms for at least 10 min. every day, in summer and winter.
• Maintain your ventilation system.
• Limit the use of household products.
• Do not smoke indoors.
• Avoid home fragrances, incense sticks, scented candles, etc.
• Ventilate whenever any work is being conducted in your home and for several
weeks afterwards.
• Avoid green plants that are allergenic or need frequent watering.
STORAGE
When you are not using the appliance, store it in a cool, dry place with ambient conditions (no
higher than 35°C) and no dust, to avoid clogging the sensor and filters.
IN THE EVENT OF A PROBLEM
•
Do not disassemble the appliance yourself. A poorly repaired appliance may be dangerous for the user.
•
Check the troubleshooting table below before contacting an Approved Service Center:
Problem
Check
Is the power cord connected?
The appliance does
Are all the display elements off?
not switch on.
Is these a power outage?
EN
Solution
Connect the power cord to a plug
with the correct voltage.
Connect the power cord to a plug
with the correct voltage.
You can use your purifier once the
power turns on again.
17
Publicidad
