Create PATIO HEATER Manual Del Usuario página 10

• Connect the power cable to a 13 amp supply that is located in a safe, dry area.
• WARNING: The heater must be properly installed before it is used.
• The switch on the heater head is used to control the three heat settings. (I) for 900 W (II) for
1200 W (I&II) for 2100 W.
• The 0 position is off.
• Although the patio heater is shower proof, do not use when raining or in wet conditions.
• Always disconnect the power cable from the electrical supply, when the patio heater is not
in use.
• When disconnected from the electrical supply, clean the outside of the patio heater with a
damp cloth. Never use corrosive or solvent cleaners or immerse in water.
• Any maintenance or repairs including replacing the halogen tube should only be carried
out by a qualified electrician or by a recommended service centre.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
E NGL I SH
10
OPERATION
CARE AND MAINTENANCE