Create PATIO HEATER Manual Del Usuario página 9

4. Place the power cord plug through the base, the bottom pole, the middle pole and the top
pole. Connect the power cord plug to the socket in the heater head.
5. Insert the heater head onto the top tube and fix in position using the 4*8 mm screws.
6. Pull the power cord gently out of the base as much as possible. Fix the power cord under
the weighted base using the supplied 4 pcs M4 nuts.
7. Fix the heater on the floor. Bore three holes in the floor, fix the heater by three wedge bolts
on the floor tightening the screws by spanner.
E NGLI SH
9