Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
WATER CONNECTIONS
enough allowance for the water intake and outake hoses to reach the water heater.
Note: If your water pipes are copper or bronze be sure to use dielectric connections
to prevent corrosion. Failure to do so may cause damage to your tank and void your
warranty. In order to protect the water heater from heat damage due to soldering,
tank.
Hot Water Connection
IMPORTANT: Failure to provide dielectric insulation may result in premature
tank or nipple failure and may void your warranty. The Temperature & Pressure
Relief valve (T&P valve) is for servicing and the valve should be in the open
position when the water heater is in operation. DO NOT APPLY HEAT DIRECTLY
TO INLET OR OUTLET CONNECTIONS.
PLEASE NOTE: MINI TANKS ARE FOR INDOOR PERMANENT INSTALLATIONS ONLY.
AND ALL AIR IS
REMOVED.THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT SUPPORT.ECCOTEMP.COM FOR MORE INFORMATION.
9
Support: Support.Eccotemp.com
Front
View of the Top
BEFORE POWERING THE WATER HEATER, BE SURE THAT THE SYSTEM IS COMPLETELY FILLED WITH WATER
Shop Online: www.Eccotemp.com
Cold Water Connection
Relief Valve
Phone: 866-356-1992
Publicidad
