Publicidad
Idiomas disponibles
Idiomas disponibles
Getting Started
FILLING THE WATER HEATER
check for leaks. To be sure that all
to fail.
1. Open the hot water faucet.
2. Open the cold water supply valve.
4. Close the hot water faucet.
POWERING THE WATER HEATER
CAUTION! Before powering the water heater, be sure that the system is completely
Wall
To be certain that all of the air is out of the water heater, open the HOT water faucet on the
Anchor
is intended to plug into a standard 110/120v receptacle. Adhere to all pertinent state and local
Temperature
Control
Do Not Block
1. Plug your Mini Tank to a grounded outlet.
SMARTHOME app
right side.
WARNING! This water heater is designed for 110/120v service - DO NOT CONNECT TO
ANY OTHER VOLTAGE. Failure to use proper voltage may result in personal injury and/
or property damage. If the supplied electrical power cord is either damaged or not long
enough, do NOT use an extension cord. Have a licensed electrician replace the power
cord.
PLEASE NOTE: MINI TANKS ARE FOR INDOOR PERMANENT INSTALLATIONS ONLY.
AND ALL AIR IS
REMOVED.THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT SUPPORT.ECCOTEMP.COM FOR MORE INFORMATION.
Support: Support.Eccotemp.com
SMART
SMART
SMARTHOME Water Heater:
SMART
BEFORE POWERING THE WATER HEATER, BE SURE THAT THE SYSTEM IS COMPLETELY FILLED WITH WATER
Shop Online: www.Eccotemp.com
Valve
Power
Cord
Manual
Control
Knob
Phone: 866-356-1992
12
Designed in
Summerville, SC
Publicidad
