Publicidad
Idiomas disponibles
Idiomas disponibles
SANITIZE: Before Sanitizing, make sure you have cleaned feeding items, bottle brushes, and
wash basins. Sanitize all items by boiling per these instructions.
1. Place disassembled feeding items into a CLEAN pot and cover with water.
2. Put the pot over heat and bring to a boil.
3. Boil for 10 minutes.
4. Remove items with clean tongs.
5. If any components yellow or harden after long-term use, these components should
be replaced if this happens.
6. Place the pieces neatly on a clean, unused paper towel or dish towel or in a clean
drying rack and allow them to air dry. Do not rub parts with a dish towel or rub or
pat dry because doing so may transfer germs to the items.
7. REMEMBER- DO NOT STORE wet or damp parts ass mold may develop.
Store Safely Until Needed
Allow the clean pump parts, bottle brushes, and wash basins to air-dry thoroughly before
storing to help prevent germs and mold from growing. Once completely dry, the items should
be stored in a clean, protected area to prevent contamination during storage.
•
Wash hands. Wash hands well with soap and water.
•
Reassemble. Put together the clean, dry pump parts.
•
Store safely. Place reassembled pump kit in a clean, protected area such as inside an
unused, sealable food storage bag. Store wash basins and bottle brushes in a clean area
CDC
https://www.cdc.gov/healthywater/hygiene/healthychildcare/infantfeeding/breastpump.html
• This product is only intended for use by a single user and should not be shared
between users
• Do not use the manual pump when driving
• Using the pump when pregnant can induce labor, do not use the manual pump when
pregnant
• Clean and Sanitize all parts that come in contact with your breast and breast milk prior
to use.
Number
1
2
1
Important Safeguards
Name
Handle
Air Cylinder
Material
PP
Liquid Silicone
Heat Sterilization
3
Publicidad
