Using The Treadmill - Superun CT04 Manual

06.USING THE TREADMILL

5.
Note： Treadmill supports connection to mobile phone via Bluetooth
System requirements:
ios13 or above ; android 6.0
1.Download PitPat app on your phone and install it Search for "PitPat" in
or above.
the app store or scan the following QR code to download and install the
app.
2. Configure PitPat app account Open PitPatt app and follow the app
After registration， click the instructions to log in or register account information
treadmill icon in the upper
3. Connect the treadmill
right corner
(1) Turn on the Bluetooth function of the mobile phone (the android mobile phone
also needs to turn on the positioning function)
(2) Open the PitPat app (if the app prompts for authorization, please grant the app
01 Waiting for the treadmill
related permissions)
to connect
(3) Enter the app home page, click the treadmill icon in the upper left corner of the
02 Searching for Wifi
home page to enter the search interface,
(devices starting with PitPat-T are your treadmills) to connect.
Display " Green" to complete
the connection Bluetooth icon on the treadmill panel lights up.
Note:
the treadmill via Bluetooth
Please refer to the APP description for detailed networking configuration
Link bracelet
08
your phone will automatically search for nearby devices. Tap your treadmill
After the treadmill makes a beep, the connection is successful, and the
Please make sure your phone is connected to the Internet when connecting
NFC
06.USING THE TREADMILL
Note： If the treadmill is not connected to the mobile app, the Bluetooth icon of the treadmill is off; if the treadmill is
successfully connected to the mobile app, the Bluetooth icon of the treadmill is on
Sleep function description:
When the treadmill stops running and there is no operation for more than 4 minutes, it will enter the sleep state. The electronic watch will
automatically turn off the display. Press any key to wake up the electronic watch, and then enter the initial standby state again after full display.
6.
Treadmill WIFI network configuration
After the treadmill is successfully connected to the mobile app, it will enter the treadmill WIFI configuration interface.
Note:
The treadmill only supports 2.4GHZ WIFI (the app also only displays the 2.4GHZ WIFI signal that the treadmill can search for), please
make sure that your network device can provide 2.4GHZ WIFI signal
(1) Find the network you need to connect to
(2) Enter your WIFI password according to the prompt. After the treadmill successfully connects to the network, the WIFI icon on the treadmill
panel lights up and the app will return to the home page.
Note:
If the WIFI connection fails, after the WIFI returns to normal, please restart the treadmill so that it can reconnect to the Internet
5.Connect the bracelet to the treadmill
Turn on the treadmill, put the screen of the bracelet on the NFC logo of the treadmill, the treadmill make a sound of "bleep" , and the bracelet is
connected with the treadmill.
Once the bracelet is successfully bound, it will recording your running information immediately.
09