Publicidad
Idiomas disponibles
Idiomas disponibles
GLOSSARY OF TERMS
Activate (operating controls)
To move an operating control so that it is in a position
that allows the tool to be actuated or that satisfies one
requirement for the tool to be actuated.
Actuate (tool)
To intentionally cause movement of the tool component(s).
Air consumption
For an air tool, the amount of air the tool uses at a particular
operating pressure and duty cycle. Air consumption is
measured in standard cubic feet per minute (SCFM).
FEATURES
PRODUCT SPECIFICATIONS
Operating Pressure............................................90 psi max.
Air Consumption at 100% Duty Cycle ............... 1.11 CFM/
Air Inlet .............................................................. 1/4 in. NPT
KNOW YOUR ROOFING CUTTER
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ADJUSTABLE EXHAUST
The exhaust can be adjusted 360 degrees to suit operator
preference.
HEX GRIP
™
Ergonomic handle with Hex Grip
comfort and grip.
HEX KEY STORAGE
Convenient hex key storage for quick blade changes and
shoe adjustment.
7.92 SCFM at 90 psi
overmold improves
™
6 – English
Air inlet port
In an air tool, the opening to which the compressed air supply
is connected, usually by means of a threaded fitting.
Duty cycle
The percentage of continuous use for an air tool.
Maximum air pressure
The maximum allowable pressure of the compressed air, as
specified by the manufacturer, for operating a tool.
Trigger
A tool operating control activated by a tool operator's
fingers.
Switch .......................................................... Variable Speed
Stroke Length ............................................................ 0.4 in.
No Load Speed .................................. 0-9,600 s/min (SPM)
Weight ......................................................................1.2 lbs.
IN-HANDLE AIR FILTER
The self-cleaning in-handle air filter helps keep debris out
to extend the life of the tool.
QUICK-CONNECT SWIVEL CONNECTOR
The quick-connect swivel connector helps prevent hose
tangles.
SHINGLE CUTTING BLADE
The shingle cutting blade is designed to help you get un-
derneath shingles for cutting while leaving the underlying
material intact.
VARIABLE SPEED SWITCH TRIGGER
This tool has a variable speed switch trigger that delivers
higher speed with increased trigger pressure.
Publicidad
