Dynascan L88+ Manual De Instrucciones página 18

Notes:
- The side keys 1 and 2 can be configured via the programming software with the
following functions: No function, squelch, high/low transmission power, scanning
(monitor), VOX function (voice operated transmission).
- For more information, consult with your salesperson.
8.- OPERATION:
8.1.- POWER ON/OFF:
To turn ON the radio, rotate the [ON/OFF/Vol] control clockwise, you will hear a "beep".
The radio will annunciation the current channel number by voice (the voice guide function
must be enabled).
To turn OFF the radio, rotate the [ON/OFF/Vol] control counterclockwise until a "click"
sounds.
8.2.- STATUS LED INDICATOR:
Will lights up red colour when transmitting, lights up green when a signal is received and
blinks red when the battery charge is low.
8.3.- VOLUME ADJUSTMENT:
Rotate the [ON/OFF/Vol] control clockwise to increase the volume level and turn it counter-
clockwise to reduce it.
8.4.- CHANNEL SELECTION:
Turn the channel selector knob clockwise to select the next channel and turn it counter-
clockwise to select the previous channel.
8.5.- BUSY CHANNEL LOCKOUT (BCL):
This function can prevent disturbance the communications on a busy channel. This
function can be enabled or disabled by programming software. If this function is enabled,
when press the [PTT] on a busy channel, the transmission will prohibited and you will hear
a warning beep. If this function is disabled, you can transmit on a busy channel.
8.6.- TRANSMITTING AND RECEIVING:
Press and hold the [PTT] and speak into the microphone radio. The status LED will light
red.
Release the [PTT] to receive a signal and the status LED will light green.
8.7.- VOICE OPERATED TRANSMISSION (VOX):
You can speak by means the radio without pressing the [PTT] to activate the transmission.
The "VOX" sensitivity function can setting by the programming software. The settings
levels are 0-9, the level 1 is less sensitivity and the level 9 of the greater sensitivity.
English - 18 -