Drain System .iIcccsscccssssesssesrnenescserceceesers - Kenmore 27122310 Instrucciones De Instalación

DRAIN SYSTEM
Drain system can be installed using a floor drain, wall standpipe, Floor drain system
floor standpipe, or laundry tub. Select method you need.
Floor standpipe drain system
Floor drain system requires a Siphon Break Kit (Part Number
285834). Minimum siphon break: 28" (710 mm) from bottom
of washer. Additional hoses may be needed.
Minimum diameter for a standpipe drain: 2" (57 mm). Minimum
carry-away capacity: 10 gal. (38 L) per minute. Top of standpipe
must be at least 39" (990 mm) high; install no higher than
96" (2.44 m) from bottom of washer.
Laundry tub drain system
Wall standpipe drain system
Minimum capacity: 20 gal. (76 L). The top of the laundry tub
must be at least 39" (990 mm) above floor.
See requirements for floor standpipe drain system.