Publicidad
Idiomas disponibles
Idiomas disponibles
Safety instructions / Assembly
and make sure that all electrical equipment
lines close to the sink unit are correctly and
safely installed.
The connection plug of the fitting must
fit into the socket; the plug must not be
changed in any way. Do not use adapter
plugs. Unmodified plugs and matching
sockets reduce the risk of electric shock.
Avoid contact with earthed surfaces such
as pipes, heaters, stoves and refrigerators.
There is an increased risk of electric shock
when your body is earthed.
Never immerse the connecting cable and
the fitting in water or other liquids and
make sure that they do not fall into the
water.
Never touch the connecting cable with wet
hands when it is connected to the mains
power supply.
Do not misuse the cable to pull the mains
plug out of the socket or similar. Keep the
cable away from heat, oil, sharp edges
or moving parts. Damaged or entangled
cables increase the risk of electric shock.
If in doubt, consult a specialist.
CAUTION! MATERIAL DAMAGE!
Improper assembly and handling of the
product can cause material damage. Have
the installation carried out by a specialist.
Switch off the water supply to your living
spaces before installation.
During installation, ensure that all seals are
correctly positioned on the sealing surfac-
es.
Do not use the fitting on low-pressure and
small electrical storage tanks or other
water heating systems
Only connect the fitting to cold water lines
Only use the product at ambient tempera-
tures above 0 °C.
If there is a risk of frost, shut off the water
supply and drain the fitting.
Do not use the product if it shows signs of
damage or its function is impaired.
12
GB/IE/NI
Leaks or escaping water can cause consid-
erable material damage to the building or
contents. Therefore, check all connections
carefully for leaks.
Before installation, familiarise yourself
with all conditions on site, e.g. the existing
water connections and shut-off devices
Do not make any changes to the device!
Do not replace the connecting cables
yourself.
Do not carry out repairs yourself, but
appoint a specialist or contact after-sales
service to avoid any risks.
Only have faulty parts replaced with origi-
nal spare parts.
• • Assembly
NOTE! Do not install in areas at
risk of frost!
CAUTION! Turn off the main water sup-
ply before installation. Otherwise, there is
a risk of injury and/or damage to proper-
ty.
If the mains connection cable of this device
is damaged, it must be replaced by the
manufacturer, its customer service depart-
ment or an equally qualified person in
order to avoid hazards.
Only connect the device to a cold water
line! If you have any questions or doubts,
please consult a plumbing specialist.
CAUTION! Turn off the water supply
before installation.
CAUTION! Do not twist the connecting
hose and do not apply tension to it.
Remove the protective cap from the fitting
thread
18
, then unscrew the fixing nut
and the two cable guide rings
13b
from the fitting thread
The fitting can be mounted so that
the power cable is routed below or
above the work surface (worktop,
sink).
12
and
13a
18
.
Publicidad
