Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting and Removing Flat Panel Display
• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
Hook adapter brackets (G) onto universal plate (F),
15
then slowly swing display in as shown. Turn screws
of adapter brackets (G) clockwise at least six times
to prevent display from being removed as shown in
detail 4.
NOTE: Tighten using 4 mm allen wrench (R).
Display can be adjusted horizontally if desired.
NOTE: It is important to lock display down!
To lock the display down, fully tighten screws to
adapter bracket as shown in detail 4.
To remove display from mount, loosen screws,
swing display away from mount, and lift display off
of mount.
Cord Management
Run cords through upright (H) using cord management holes.
16
WARNING
F
SCREWS
G
DETAIL 4
CORD
MANAGEMENT
13 of 41
All other brand and product names are trademarks or registered trademarks of their respective owners.
F
ISSUED: 02-25-11 SHEET #: 009-9051-2 09-14-11
© 2011, Peerless Industries, Inc. All rights reserved.
G
H
Peerless Industries, Inc.
3215 W. North Ave.
Melrose Park, IL 60160
www.peerlessmounts.com
Publicidad
