Publicidad
Idiomas disponibles
Idiomas disponibles
Loosely attach six 1/4-20 x 12 mm screws (L) and
7
1/4-20 nuts (M) to display mount bracket (A).
L
Snap top cover (J) onto upright (H).
9
M
A
J
H
Slide display mount bracket (A) onto upright (H) so
8
that 1/4-20
shown in fi gure 8.1 and detail 2. Slide display mount
bracket to desired position, level, then tighten 1/4-
20 x 12 mm screws (L) using 4 mm allen wrench
(Q).
M
H
DETAIL 2
Insert two 1/4-20 x 12 mm screws (L) into display
10
mount bracket (A), leaving 3/16" of exposed thread
as shown in fi gure 10.1 and detail 3.
L
A
9 of 41
ISSUED: 02-25-11 SHEET #: 009-9051-2 09-14-11
nuts (M) slide into slots of upright (H) as
A
L
SLOT
H
fi g. 8.1
DETAIL 3
fi g. 10.1
3/16"
Publicidad
