Publicidad
Idiomas disponibles
Idiomas disponibles
Make a backup of important
recorded data
JVC will not be responsible for any lost
data. It is recommended to copy your
important recorded data to a DVD or other
recording media for storage. (p. 22)
Make a trial recording
Before the actual recording of important
data, make a trial recording and play back
the recorded data to check that the video
and sound have been recorded correctly.
Reset the camera if it does
not operate correctly
This camera uses a microcomputer.
Factors such as background noise and
interference can prevent it from operating
correctly. If the camera does not operate
correctly, reset the camera. (p. 33)
Precautions on handling
batteries
•
Be sure to use the JVC BN-VF808U/
VF815U/VF823U battery packs.
•
If the camera is subjected to electrostatic
discharge, turn the power off before
using it again.
If a malfunction occurs, stop
using the camera immediately
and consult your local JVC
dealer
•
If a problem occurs when using the
microSD card, take the card together
with the camera for repair. If one of
them is not included, the cause of the
malfunction cannot be diagnosed, and
the camera cannot be repaired.
•
Recorded data may be erased while the
camera is being repaired or inspected.
Back up all data before requesting
repairs or inspections.
Because the camera may be
used for demonstration in
a shop, the demonstration
mode is set to [ON] by default
To deactivate the demonstration mode, set
[DEMO MODE] to [OFF] from the MENU.
When connecting the camera
to other devices using an
optional DV cable, make
sure to follow the procedure
below. Connecting the
cable incorrectly may cause
malfunctions to the camera
and/or other devices.
•
Connect the DV cable fi rst to the device,
and then to the camera.
•
Connect the DV cable (plugs) correctly
according to the shape of the DV
connector.
7
Publicidad
