2
1
3
Shoulder Strap Attachment
1
1
2
Tripod Mounting
1
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
ATTACH STRAP
Following the illustration at left, thread the strap
through the top of the eyelet
and thread it through the buckle
procedure to attach the other end of the strap to the
other eyelet
3
, making sure the strap isn't twisted.
ADJUST LENGTH
Adjust as shown in the illustration at left
ALIGN AND TIGHTEN
Align the screw and camera direction stud on the
tripod with the camera's mounting socket and stud
hole. Then tighten the screw.
15
EN
1
, then fold it back
2
. Repeat the
1
.