Publicidad
Idiomas disponibles
Idiomas disponibles
Viewfinder
MENU
4
MENU END
FOCUS
AUTO
EXPOSURE
AUTO
DATE TIME
DEC
25. 98
TELE MACRO
OFF
T30
TAPE LENGTH
M. W. B.
AUTO
ZOOM SPEED
FAST
4
NEXT
M. W. B.
AUTO
: FINE
: CLOUD
: HALOGEN
MWB
EXIT
Select Dial
NOTES:
To switch to automatic white balance
adjustment, set the M.W.B. in the Menu
Screen to "AUTO", or turn the Select Dial to
"AUTO LOCK".
Re-adjust the White Balance when the
lighting has changed, when the camcorder
has been turned off and on again, or when
the Select Dial's position has been changed.
When adjusted by putting colored paper in
front of the subject in step 1 of "MWB", this
unit makes its color temperature standard for
automatic white balance. So you can enjoy
shooting with different colors. For example,
when adjusting with red, blue or yellow
colors, the image becomes the color which
approximates to green, orange or purple
respectively.
It is helpful to connect your camcorder to a
color monitor when adjusting the white
balance (
pg. 37).
Manual White Balance Adjustment
(M.W.B.)
Menu Screen
The white balance is usually adjusted automatically.
However, the more advanced camcorder operator would
prefer to control this function manually and achieve a
more professional color/tint reproduction.
1
M.W.B.
Menu Screen
2
3
MENU
4
Jog Dial
MWB
MWB sets the color temperature for the subject's light
source so you can shoot with natural colors that are
unaffected by surroundings, even when there are
multiple subjects with different color temperatures.
1
2
3
4
ACCESS MENU SCREEN
Turn the Select Dial to any position except AUTO
LOCK, then press the MENU Jog Dial. The Menu
Screen appears.
ACCESS WHITE BALANCE MENU
SCREEN
Rotate the MENU Jog Dial to move the highlight bar
to "M.W.B.", then press it.
SELECT WHITE BALANCE
Rotate the MENU Jog Dial to move the highlight bar
to the required white balance.
"AUTO" ................... Automatic adjustment
"
: FINE" ............. Outdoors on sunny day
"
: CLOUD" ........ Outdoors on cloudy day
"
: HALOGEN" ... Light source is halogen or
tungsten lamp
"MWB" .................... When using a personal White
Balance Setting stored in
memory (see below.)
CLOSE MENU
Press the MENU Jog Dial. The Menu Screen
reappears. Then press the MENU Jog Dial again to
exit the Menu Screen.
PREPARE WHITE OBJECT
Point the camcorder at a white, flat object such as a
sheet of white paper.
SELECT MWB
Follow step 1 through 3 of the above, select
"MWB".
MEMORIZE WHITE BALANCE
Press the MENU Jog Dial until "MWB" begins
blinking. "MWB" blinks while the white balance is
being stored in memory, then the Menu Screen
reappears when memorization is complete.
CLOSE MENU
Press the MENU Jog Dial.
33
EN
Publicidad
