Publicidad
Idiomas disponibles
Idiomas disponibles
HARDWIRE ASSEMBLY INSTRUCTIONS
5. Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Push wire connectors (AA) gently back into outlet
box. Carefully push excess wiring into outlet box.
Continue to Step 6 below ("FINAL ASSEMBLY
INSTRUCTIONS") to complete installation.
FINAL ASSEMBLY INSTRUCTIONS
6. Attach fixture (A) to mounting plate (C) using
the mounting plate screws (D) previously
removed (Step 3, Page 5).
NOTE: Fixture (A) can be installed with the
socket facing either up or down.
7. Remove socket ring (G) from socket of fixture
(A). Attach shade (F) to socket using socket
ring (G).
WARNING: Do NOT overtighten socket
ring as shade may crack or break.
Install one 60-watt max. standard-base
incandescent bulb (not included) or CFL/LED
equivalent.
WARNING: When replacing bulb, allow
bulb and fixture to cool down before touching.
5
A
6
7
10
AA
AA
D
A
D
Bulb
(not included)
G
F
A
AA
Outlet
Box
C
Publicidad
