Mark MRACK 12E Manual Del Usuario página 6

MASTER BLOCK
1. MAIN OUT
These are XLR and TRS balanced output that
output the mixed stereo signal.
2. GROUP OUT jacks
These impedance-balanced TRS output the
(GROUP 1-2) signals. Use those jacks to
connect to the input of a multi-track recorder,
external mixer, or another similar device.
3. AUX jacks
AUX (1-2) are impedance-balanced TRS, these
jacks output signals from AUX. You use these
jacks, for example, to connect to an external
effect device.
4. RETURN
These are unbalanced jacks. Signal received
by these jacks is sent to the MAIN BUS.
These jacks are typically use to receive return
from an external effect device (reverb, delay...)
5. PHONES jack
Connect a pair of headphones to this TRS
phone jack.
6. SEND knob AUX(1-2)
For adjusting the level of the signals output to
the SEND jack and AUX(1-2).
7. RETURN knob
For adjusting the level of the signals sent
from the RETURN input jack to the stereo
BUS.
8. PHONES knob
For adjusting the level of the signals output to the phones.
9. POWER level control
The level meter LED shows the level of the signal in the MAIN and GROUP buses or selected PFL
channel.
5