Publicidad
Idiomas disponibles
Idiomas disponibles
This document has been drawn up in order to help you get to know how to use your ESP280 ventilator.
All operating and safety instructions must be strictly followed in order to avoid accidents or problems.
All operations involving dismantling or repair must be carried out by LEADER, or by an approved dealer.
This document demonstrates the ease of use and maintenance of the ESP280 ventilator. If you have any
suggestions for improving this document, LEADER. Would be very happy to hear them. Please do not hesitate
to contact us.
1 SAFETY INSTRUCTIONS
❖ INSTRUCTIONS
• This equipment is manufactured in compliance with CE directives. It should be used only by fire-fighting
professionals.
• LEADER, or its subsidiaries, disclaim all liability for any direct, indirect or incidental damages related to the supply,
performance or use of the device.
• Read this manual completely, together with the attached instructions for the use and maintenance of the engine before
starting up or using the equipment.
• Keep fingers and hands away from the turbine.
• This ventilator must be operated or repaired only by qualified, trained staff.
• Do not start up the engine if the blades or the protective shroud show any signs of damage.
• Never move the ventilator when it is running at full speed.
• ESP type blowers must not be used in explosive atmospheres.
• Do not remain in the fan's outlet area (risk of flying debris).
• Keep this equipment out of reach of children.
• Wear safety glasses, gloves and earmuffs when using this ventilator.
• Never allow anyone to use a ventilator without first giving them the necessary instructions.
• Do not wear loose clothing which could get caught in the ventilator.
• Do not use chocks or any other system for increasing the ventilator's tilt angle.
• Use only the accessories provided and validate by LEADER.
❖ MAINTENANCE INSTRUCTIONS
• This equipment should be used or repaired only by fire-fighting professionals.
• Only use genuine spare parts supplied by LEADER. when replacing defective parts.
• During maintenance operations, switch off the power.
2 GENERAL CHARACTERISTICS
•
Chassis in Ø 30 mm/0.10 ft steel tube - epoxy coating.
•
Soft Starter.
•
Electrical system 7.5kW -15.5A (steady-state) and 32A
starting current.
•
Power Supply: 400V - 50Hz three phase 3P+N – IP55.
•
Fan shroud in 3mm/0.01ft sheet aluminium.
•
Turbine made of composite resin – Ø 570 mm/1.87 ft.
•
Noise level around 96.3 dB(A) at 3 m/9.84 ft.
•
Retractable handle, two Ø 230mm/ 0.75 ft wheels.
•
Angle of tilt adjustable (from 10° to 20°).
•
Airflow: 115700 m³/h. /68100 cfm.
L
Pr
10
H
Weight: 75.5 kg/166.45 lbs
+/- 0.5 kg/1.1 lbs
H : 720 mm/2.36 ft
L : 710 mm/2.33 ft
Pr : 678 mm/2.22 ft
+/-5 mm/0.016 ft
Publicidad
