Lumisky 2X BLINKY Manual De Instrucciones página 5

- No need to worry about the weather. The structure of the lamp is designed to be waterproof.
- Wondering if it's on? Simply cover the solar panel with your mains or place it in a dark environ-
ment and the light should turn on. If not, place them in direct sunlight to charge for 5-6 hours,
then test again.
- If the lights lose time or illumination intensity, a dusty solar panel may be the cause. To ensure
a consistent glow, simply clean the solar panel every 3 months.
- This light is a dusk to dawn light, it works on its own. It is designed to turn on at night (the
surrounding environment is less than 10-100 lux), it charges during the day (above 100 lux) and
stays off during the day.
- Solar light performance depends on geographic location, weather conditions and seasonal
availability of sunlight.
1. On cloudy days and in winter, the solar light will not receive as much direct sunlight, resulting
in reduced brightness and reduced operating time. Please turn on the light in low light mode at
lower brightness.
2. Lower temperature may result in shorter lighting duration. To protect the battery, minus 10
degrees and above may turn off the light, please be informed that the light is NOT DEFECTIVE, it
will resume working once the temperature rises.
5