Publicidad
Idiomas disponibles
Idiomas disponibles
WASHER DISPOSAL
This appliance is marked according to the European directive 2002/96/EC
on Waste Ebctrical and Electronic Equipment
(WEEE).
By ensuring this product is disposed of correctly, you will help avoid potential negative consequences
for the environment
and
human health, which could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product, or on the documents
accompanying
the product, indicates that this appliance may not be treated
as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and
electronic equipment.
Disposal must be carried out in accordance
with local environmental
regulations for waste disposal.
For more detailed information
about treatment, recovery and recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
INSTALLATION REQUIREMENTS
Alternate Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting
the water inlet hoses
•
Pliers (that open to
•
Flashlight (optional)
39.5 mm [1
9/16"])
Tools needed for installation
•
Open end wrenches
1/2" and 9/16"
•
Torx _t T-20 Security
screwdriver
•
1/4" nut driver
•
Level
•
Wood block
•
Ruler or measuring tape
Parts supplied
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, contact your
authorized Whirlpool distributor.
If You Have
You Will Need to Buy
Laundry tub or
Sump pump system (if not already
standpipe taller
available)
than 2.4 m (96")
Overhead sewer
Floor drain
Standard 76 L (20 gal. ), 762 mm (30") tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Siphon break, Part Number 285320;
additional drain hose,
Part Number 8318155; and Floor drain
kit, Part Number 280129
Drain hose
1.2 m (4 ft.) drain hose extension kit,
too short
Part Number 285834
A
B
C
D
E
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
E. Beaded tie strap
1-@TORX is a registered trademark
of Acument
Intellectual
Properties,
LLC.
4
Publicidad
