Zanussi ZWAN82ES Manual De Instrucciones página 8

4. CONTROL PANEL
Temperature indicator LED
1
FastFreeze indicator
2
FastFreeze button
3
Temperature regulator
4
ON/OFF button
4.1 Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator button if
all LED indicators are off.
4.2 Switching off
Keep touching the temperature regulator
button for 3 seconds.
All indicators light off.
4.3 Temperature regulation
To operate the appliance, touch the
temperature regulator until the LED
corresponding to the required temperature
lights up. Selection is progressive, varying
from 2°C to 8°C. Recommended setting is
4°C.
1. Touch temperature regulator.
Current temperature indicator blinks. Any
time you touch the temperature regulator, the
setting moves by one position. The
corresponding LED blinks for a while.
2. Touch the temperature regulator until the
required temperature is selected.
The set temperature will be reached
within 24 hours. After a power failure the
set temperature remains stored.
8 ENGLISH
1 1 2 2
4 4 3 3
4.4 FastFreeze function
The FastFreeze function is used to perform
pre-freezing and fast freezing in sequence in
the freezer compartment. This function
accelerates the freezing of fresh food and, at
the same time, protects food products already
stored in the freezer compartment from
undesirable warming.
To freeze fresh food activate the
FastFreeze function at least 24 hours
before placing the food to complete pre-
freezing.
To activate FastFreeze function press the
FastFreeze button. The FastFreeze indicator
switches on.
This function stops automatically after 52
hours.
It is possible to deactivate the function at any
time by pressing FastFreeze button again.
The FastFreeze indicator switches off.
4.5 Door open alarm
If the fridge door is left open for
approximately 5 minutes, the sound is on.
During the alarm the sound can be muted by
pressing any button. The sound switches off
automatically after around one hour to avoid
disturbing.
The alarm deactivates after closing the door.