Technical Data; Noise And Vibration Information - Trumpf TruTool TPC 165 Manual Del Usuario

2.1 Technical data

Operating voltage
Stroke number when
idling
Weight without cable
Maximum material
thickness
Steel up to 400 N/mm
Maximum material thick-
ness with insulation
PUR foam or PIR foam
Noise and vibration emission values
Vibration emission value
a (vector sum of three
h
directions)
Uncertainty K for vibration
emission value
A-assessed sound
pressure level L
PA
typically
A-assessed sound power
level L typically
WA
Uncertainty K for noise
emission values
TPC 165
(2A1)
230 V~ 50/60 Hz
120 V~ 50/60 Hz
2300/min
9.7 kg / 21.4 lbs
0.9 mm /
0.035 in
2
165 mm / 6.5 in
2
2.8 m/s
2
1.5 m/s
107 dB (A)
118 dB (A)
4 dB
Translation of the original operator's manual

2.2 Noise and vibration information

WARNING
Hearing damage if noise emission
value is exceeded
Wear hearing protection.
u
WARNING
Danger of injury if vibration emis-
sion value is exceeded
Select tools correctly and change
u
promptly in case of wear.
Specify additional safety measures to
u
protect the operator against the effect
of vibrations (e.g. keep hands warm,
organization of work processes, pro-
cessing with normal feed force).
Carry out machining at normal feed
u
power.
Depending on the conditions of use
u
and condition of the machine, the ac-
tual load may be higher or lower than
the specified measurement.
The specified vibration emission value was
measured according to a standardized test
process and can be used to compare power
tools. It can also be used for a preliminary
estimation of the vibration load.
Times when the machine is switched off or is
running, but not actually in use, can signifi-
cantly reduce the vibration load across the
working period overall.
EN
13