PRODUCT OVERVIEW
Concrete vibrator consists of drive unit and vibrating poker. The product is used for compaction of fresh concrete mortar. The
vibrating poker removes air bubbles from mortar, which allows to obtain concrete with a more uniform structure. The vibrator is
powered by a battery, which allows for its working in places without easy access to the mains. The correct, reliable, and safe
operation of the product requires on its proper use, therefore:
Read the entire instructions manual before the fi rst use of the product and keep it for future reference.
The supplier is not liable for any damage resulting from failure to observe the safety instructions and recommendations contained
in this manual.
PRODUCT ACCESSORIES
The factory packaging includes the drive unit and the poker. The device is not equipped with a battery and a battery charger.
TECHNICAL DATA
Parameter
Catalogue No.
Rated voltage
Rated rpm
Vibration frequency
The shaft and poker length
Poker diameter
Noise level
sound pressure LwA ± K
sound power L
± K
pA
Vibration level a
± K
h
Insulation class
Protection rating
Net weight
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
The declared total vibration value has been measured using the standard test method and can be used to compare one tool to
another. The declared total vibration value can be used in the initial exposure assessment.
Note! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is used.
Note! Safety measures to protect the operator, which are based on an assessment of exposure under actual conditions of use (in-
cluding all parts of the work cycle, such as the time when the tool is switched off or idle and the activation time), must be specifi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
O R I G I N A L
EN
Unit
[V DC]
[min
]
-1
[min
]
-1
[m]
[mm]
[dB(A)]
[dB(A)]
[m/s
2
]
[kg]
I N S T R U C T I O N S
Value
YT-82604
18
3100
12500
1.2
25
63.0 ± 3.0
74.0 ± 3.0
3.2 ± 1.5
II
IPX0
3.0
11