Preparation For Installing The Unit; Environment; Environmental Conditions - Ingeteam INGEREV FUSION Street Manual De Instalacion Y Uso

Ingeteam

5. Preparation for installing the unit

When deciding the location of the unit and planning your installation, you must follow a set of guidelines based on
the specifications of the unit.

5.1. Environment

• These units can be installed indoors and outdoors.
• Situate the units in a place that is accessible for installation and maintenance work, which permits them
to be operated and the indicator LEDs to be read.
• Avoid corrosive environments that may affect the proper operation of the unit.
• Do not leave objects leaning on the unit or against its sides.
• Keep the following minimum distances free of obstacles:
c m
3 0
3 0 c m
INGEREV FUSION Street

5.2. Environmental conditions

CAUTION
Ingeteam does not guarantee the proper operation of the equipment if the operation conditions for which it has
been designed are not fulfilled.
Environmental operating conditions indicated in section "2.3. Specification table" must be taken into account
when choosing the location of the unit.
It should be borne in mind that moderate condensation may occasionally occur as a consequence of temperature
variations. For this reason, apart from the unit's own protection, it is necessary to monitor these charging stations
once they have been started up on sites where the conditions described above are not expected to be present.
18
3 0 c m
Preparation for installing the unit
3 0 c m
c m
3 0
INGEREV FUSION Wall
ABW2011IQM01_A - Installation and Operation Manual
3 0 c m