Publicidad
Idiomas disponibles
Idiomas disponibles
C. Installation instruction
Installation diagram (solar connection only available in the MANANTIAL300SZ model):
太阳能集热板1
Solar Collector1
Remark:
1. For the first time use, ensure the water tank have been filled with water before power on to
prevent burn out. Meanwhile, the circulation water pipe should be filled with water, no air
left inside. Checking the pipe to ensure the water circulates successfully.
2. Follow with the water heater unit, there are some installation parts (see the annex detail
list of parts). As for other water system components, the user or installation company
should provide by themselves.
3. Before installation, it's better to reserve a water supply pipe interface, hot water outlet pipe
interface and drainage pipe interface. Among them, the water supply pipe and hot water outlet
pipe should be used in line with standards for drinking water pipes. (E.g. PPR pipe or
stainless steel pipe, etc.), can not use iron pipe or the rubber hose with odor for installation.
4. If the using place below 0ºC, please adopt the second circulation system (connect solar
coil in the water tank), the heat-conducting medium should be anti-freezing liquid
(propanediol suggested). Make sure to insulate the water pipes to prevent frozen.
5. Air inlet /outlet can connect Φ153mm vent tube, but pipe should not be too long and less
crankle.
Temperature Sensor
温度传感器
太阳能集热板2
Solar Collector2
Circulation Pump
循环水泵
单向阀
One-way Valve
(水或防冻液)
Water/anti-freezing Liquid
过滤器
Filter
冷水进
Water Inlet
(自来水端)
Water Supply
出风
Air Outlet
风管
Vent Tube
Exhaust Valve
排气阀
溢流水管
Condensate Overflow drain
热水出
Hot Water Outlet
(用水端)
(Hot Water use)
Valve
阀门
冷凝水排出
Condensate water drainage
三通
安全阀
Safety Valve Three-port Valve
Anti-electrolysis barriers
球阀
Ball Valve
排污管
Drainage Pipe
6
Air Inlet
进风
CLOCK
ON/OFF
TIMER
MODE
V.1
Publicidad
