Publicidad
EN Safety FR Sécurité PL Bezpieczeństwo RO Siguranță
ES Seguridad PT Segurança TR Güvenlik
EN
Safety
•
These instructions are for your safety.
Please read through them thoroughly prior to
installation and retain them for future reference.
•
All fittings must be installed by a competent
person in accordance with local regulations
(IET wiring regulation BS7671).
•
Check the pack and make sure you have all of
the parts listed.
•
Remove all packaging, wrap etc from the product.
•
Decide on the appropriate location for your
product.
CAUTION: IP54 is guaranteed when the
•
product is properly installed and sealed.
•
Always avoid the product to be located at
corrosive environment.
•
Always refer to the installation drawing for the
orientation of the product.
•
The product must be securely fixed to the
mounting surface using the screws and wall
plugs supplied. The screws and wall plugs
supplied are suitable for "masonry" only. Other
fixings not supplied and must be purchased.
•
Take care not to drill into any pipes or mains
cables beneath the surface during mounting
holes preparation.
IMPORTANT: The fixing point(s) selected must
•
be capable of supporting the full weight of the
light fitting.
•
Wiring diagram is for reference only. Always refer
to the terminal marking for wiring. Ensure that all
electrical connections are tight and that no loose
strands are left out of the terminal block.
•
Never put anything on the product or hang
anything on any part of this product.
•
Never use the terminal cables to bear the
product weight.
•
When the product does not light after
installation:
> Ensure there is no electricity failure
> Ensure all the connections are secured
•
If you have any doubt about installation/use of
this product, consult a qualified electrician.
•
Always disconnect the product from mains at
least 10 minutes allowing to cool down before
any maintenance or adjustment.
•
It is recommended to have a regular schedule
of care and maintenance to keep the surface
condition well.
5059340847320_MNL_IN_V02.indd 3
5059340847320_MNL_IN_V02.indd 3
Technical Data
Supply
220-240 V~, 50 Hz
voltage:
1 x Max. 25 W E27 (check bulb
Bulb
dimensions in relation to space
type:
available).
This product complies with conformity
requirements of the applicable
European Regulations or Directives.
This product complies with conformity
requirements of the applicable UK
Regulations.
Class I product, must be connected
to earth.
IP54
Splashproof
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
local store for recycling advice.
xxWyy:
xx-year; yy-week of the year
Guarantee
We take special care to select high quality materials
and use manufacturing techniques that allow us to
create products incorporating design and durability.
This product has a manufacturer's guarantee of
2 years against manufacturing defects, from the
date of purchase (if bought in store) or date of
delivery (if bought online), at no additional cost
for normal (non-professional or commercial)
household use.
To make a claim under this guarantee, you must
present your proof of purchase (such as a sales
receipt, purchase invoice or other evidence
admissible under applicable law), please keep your
proof of purchase in a safe place. For this guarantee
to apply, the product you purchased must be new,
it will not apply to second hand or display products.
Unless stated otherwise by applicable law, any
replacement product issued under this guarantee
will only be guaranteed until expiry of the original
period guarantee period.
3
4/9/2023 5:18 PM
4/9/2023 5:18 PM
Publicidad
