Publicidad
Idiomas disponibles
Idiomas disponibles
Settings Description
•
For China: Wi-Fi connection on channels CH5 to CH10 is not supported on some mobile
phones. Please use other available channels.
•
For Japan: Wi-Fi connection on channels CH3 to CH8 is not supported on some mobile
phones. Please use other available channels.
•
For the United States and Europe: Wi-Fi connection on channels CH1 to CH8 is supported
on mobile phones.
•
For other countries and regions: Please refer to the local wireless regulations and select
the channels supported in China, Japan, the United States, or Europe accordingly.
Scan
•
This function is only available in receiver mode. It scans the Wi-Fi signal strength in the
environment. In the channel scan result, the yellow bar indicates the channel currently
used by the device, the green bar indicates low-interference channels, and the red bar
indicates strong-interference channels. You are advised to use the channels indicated by
the green bar.
•
To switch channels, simply tap the corresponding bar in the channel scan result.
Pairing
•
You can perform pairing after the device is turned on and the channel number is
displayed.
•
1 TX + 1 RX pairing: Start pairing on both the transmitter and the receiver at the same
time.
•
1 TX + 2 RX pairing: After pairing the transmitter with receiver 1, pair the transmitter with
receiver 2. The transmitter cannot be paired with two receivers at the same time.
EN-13
Publicidad
