Descargar Imprimir esta página

GENEVERSE HOMEPOWER TWO PRO Guia Del Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

3 Ways to Recharge
1
By AC / Wall Outlet or Gas Generator
(1500W of input): 1.5 hours to 80%,
2 hours to 100%
.5 Hrs
2
By Solar (800W of input):
3 hours to 80%, 4 hours to 100%
3 Hrs
3
By Car Outlets (96W of input):
22.5 hours to 80%, 28.5 hours to 100%
22.5 Hrs
2 Hrs
4 Hrs
28.5 Hrs
Display
Battery level &
charging status indicator
Battery capacity
Estimated
remining
time
until fully
charged
Recharging
wattage
Low
Wi-Fi connection
battery
indicator
warning
(<10%)
Bluetooth
connection
indicator
Maximum Power Point
Automatic Continuous Power System (ACPS) is active.
Tracking (MPPT) mode is
When the unit is connected to a wall outlet via the AC 3-pin input port,
the power output of the three AC outlets on the unit will be
active (when using solar
automatically drawing power directly from the wall outlet instead
panels to recharge)
of using the power from its battery. The ACPS mode helps prolong the battery life.
Estimated remaining
time that it can
supply power
Turn on/off
display
Discharging wattage
AC outlets voltage & frequency
Temperature too low
Temperature too high
Malfunction warning

Publicidad

loading