GreenWorks HTF320 Manual Del Operador página 10

Problem Possible cause
The machine
The machine has
smokes during op-
damage.
eration.
The machine has
damage.
The motor is on,
blades do not
move.
The blades are
blocked.
The parts are loos-
There is too much
en.
noise and/or vibra-
tion during opera-
tion.
The parts have
damage.
10 TECHNICAL DATA
Voltage
No load speed
Blade length
Cutting capacity
Weight
11 LIMITED WARRANTY
3
LIMITED WARRANTY
GARANTIE LIMITÉE
GARANTÍA
LIMITADA
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3)
years against defects in materials, parts or workmanship.
English
Solution
1. Immediately
stop the ma-
chine.
2. Disconnect the
plug from
power source.
3. Speak to serv-
ice center.
Do not use the ma-
chine and speak to
service center.
Disconnect the
plug from power
source then clear
blockage from the
blades.
1. Stop the ma-
chine.
2. Disconnect the
plug from
power source.
3. Inspect for
damage.
4. Check and
tighten loose
parts.
Do not use the ma-
chine and speak to
service center.
4A, 120 V
3200 (±10%) SPM
22''
5/8'' (16 mm)
2.75 kg (6.06 lbs.)
YEAR
ANS
AÑOS
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade
sharpening;
5. Normal deterioration of the exterior finish due to use or
exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline,
at 1-888-909-6757.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of the
purchaser. It is the purchaser's responsibility to pay
transportation charges for any part submitted for replacement
under this warranty unless such return is requested in writing
by Greenworks.
USA address:
Greenworks Tools
P.O. Box 1238
Mooresville, NC 28115
9
Canadian address:
Greenworks Tools Canada Inc.
1110 Stellar Drive Unit 102
Newmarket, ON, L3Y 7B7
EN