JCB -18CS Instrucciones De Funcionamiento página 10

Check the operation of the lower
m
guard spring. If the guard and the
spring are not operating properly,
they must be serviced before use.
Lower guard may operate sluggishly due to
damaged parts, gummy deposits, or a build-
up of debris.
The lower guard may be retracted
m
manually only for special cuts such
as "plunge cuts" and "compound
cuts". Raise the lower guard by the
retracting handle and as soon as the
blade enters the material, the lower
guard must be released. For all other
sawing, the lower guard should operate
automatically.
Always observe that the lower guard
m
is covering the blade before placing
the saw down on bench or floor. An
unprotected, coasting blade will cause the
saw to walk backwards, cutting whatever is
in its path. Be aware of the time it takes for
the blade to stop after switch is released.
JCB-18CS
Instruction & User Manual
9