2/ Wireless association
2.2 Association of a Tyxia micromodule receiver
on individual order
❶ Switch on and set the receiver to pairing mode by
pressing its button for 3 seconds until its LED flashes
red, then release.
❷ On the remote control, press
same time and hold for 3 seconds until the red LED
flashes, then release the buttons.
When the receiver is detected, the LED briefly lights up
green and the receiver stops flashing.
The shutter activates briefly to confirm the pairing.
The remote control automatically exits pairing mode.
2.3 Association of several DELTA DORE radio motors
or Tyxia micromodules in centralized control
Important: if you pair several motors with the remote
control, you will no longer have access to the stop
settings from this remote control.
20
and
at the
2
2
1
1