Publicidad
STEP 13
IMPORTANT! THE BACK PANELS ARE A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
Carefully turn your unit on its front side.
Attached the back panels as shown nailing straight into the raw edges.
IMPORTANT! Do not hammer in the nails in the center row until lower back panel is in place
as the back panels will overlap.
B
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
8
(x1)
1st
raw
surface
Flush bottom edge of the
lower back panel with the
bottom edge of bottom (F).
12
(x48)
2nd
D
21
12
F
8
You
Tube
Publicidad
